Maintenance4 min read

Six signs your console is overheating

Loud fans, shutdowns and dropped frames are early warnings. What overheating does to a console, why thermal paste dries out, and when a deep clean is the fix.

The early warnings

A console that used to be quiet and now sounds like a hairdryer is telling you something. So is one that shuts down after an hour of play, drops frames in a menu, or blows noticeably hot air within minutes of switching on.

These are all cooling symptoms rather than faults in the game or the console software. Catching them early is the difference between a clean and paste refresh and a board-level repair.

Why thermal paste dries out

The paste between the processor and the heatsink is there to fill microscopic gaps. Heat cycles dry it out over a few years, it cracks, and the gap it was filling stops transferring heat properly. The fan then runs harder to compensate, which pulls in more dust and makes the problem worse.

Consoles kept in closed TV cabinets, on carpet or in shared student housing get there faster because they are breathing warmer, dustier air.

What a deep clean involves

The console is stripped down, the heatsink and fan are cleaned properly rather than blown at from outside, the old paste is removed and fresh paste is applied. Thermal pads are checked at the same time, and the console is reassembled and tested under load.

This is the single most common repair we do, and it is also the one most often skipped. A console that has never been opened is very likely to need it.

What not to do

Do not run a console without its case on, do not put it on a soft surface and do not use a household vacuum near the vents. Static and loose components do more damage than the dust you remove.

More guides